targetContentOffsetForProposedContentoffset: withScrollingVelocity without subclassing UICollectionViewFlowLayout
Mam bardzo prosty collectionView w mojej aplikacji (tylko jeden rząd kwadratowych miniaturek zdjęć).
Chciałbym przechwycić przewijanie, aby przesunięcie zawsze pozostawiało pełny obraz po lewej stronie. W tej chwili przewija się gdziekolwiek i pozostawi odcięte obrazy.
W każdym razie Wiem, że muszę użyć funkcji
- (CGPoint)targetContentOffsetForProposedContentOffset:withScrollingVelocity
Aby to zrobić, ale używam tylko standardowego UICollectionViewFlowLayout
. Nie podklasuję tego.
Czy Jest jakiś sposób na przechwycenie tego bez podklasowania UICollectionViewFlowLayout
?
Dzięki
16 answers
OK, odpowiedź brzmi Nie, Nie ma sposobu, aby to zrobić bez podklasowania UICollectionViewFlowLayout.
Jednak podklasowanie jest niezwykle łatwe dla każdego, kto czyta to w przyszłości.
Najpierw skonfigurowałem wywołanie podklasy MyCollectionViewFlowLayout
, a następnie w interface builder zmieniłem układ widoku kolekcji na niestandardowy i wybrałem podklasę flow layout.
Ponieważ robisz to w ten sposób, nie możesz określić rozmiarów przedmiotów itp... in IB so in MyCollectionViewFlowLayout.m I have to...
- (void)awakeFromNib
{
self.itemSize = CGSizeMake(75.0, 75.0);
self.minimumInteritemSpacing = 10.0;
self.minimumLineSpacing = 10.0;
self.scrollDirection = UICollectionViewScrollDirectionHorizontal;
self.sectionInset = UIEdgeInsetsMake(10.0, 10.0, 10.0, 10.0);
}
To ustawia wszystkie rozmiary dla mnie i kierunku przewijania.
Więc ...- (CGPoint)targetContentOffsetForProposedContentOffset:(CGPoint)proposedContentOffset withScrollingVelocity:(CGPoint)velocity
{
CGFloat offsetAdjustment = MAXFLOAT;
CGFloat horizontalOffset = proposedContentOffset.x + 5;
CGRect targetRect = CGRectMake(proposedContentOffset.x, 0, self.collectionView.bounds.size.width, self.collectionView.bounds.size.height);
NSArray *array = [super layoutAttributesForElementsInRect:targetRect];
for (UICollectionViewLayoutAttributes *layoutAttributes in array) {
CGFloat itemOffset = layoutAttributes.frame.origin.x;
if (ABS(itemOffset - horizontalOffset) < ABS(offsetAdjustment)) {
offsetAdjustment = itemOffset - horizontalOffset;
}
}
return CGPointMake(proposedContentOffset.x + offsetAdjustment, proposedContentOffset.y);
}
Zapewnia to, że przewijanie kończy się marginesem 5.0 na lewej krawędzi.
To wszystko, co musiałem zrobić. Nie musiałem w ogóle ustawiać układu przepływu w kodzie.Warning: date(): Invalid date.timezone value 'Europe/Kyiv', we selected the timezone 'UTC' for now. in /var/www/agent_stack/data/www/doraprojects.net/template/agent.layouts/content.php on line 54
2012-11-21 12:52:10
Rozwiązanie Dana jest wadliwe. Nie radzi sobie dobrze z flickingiem użytkownika. Przypadki, gdy użytkownik szybko i przewijanie nie poruszał się tak bardzo, mają usterki animacji.
Moja proponowana alternatywna implementacja ma taką samą paginację jak zaproponowana wcześniej, ale obsługuje przesuwanie między stronami.
#pragma mark - Pagination
- (CGFloat)pageWidth {
return self.itemSize.width + self.minimumLineSpacing;
}
- (CGPoint)targetContentOffsetForProposedContentOffset:(CGPoint)proposedContentOffset withScrollingVelocity:(CGPoint)velocity
{
CGFloat rawPageValue = self.collectionView.contentOffset.x / self.pageWidth;
CGFloat currentPage = (velocity.x > 0.0) ? floor(rawPageValue) : ceil(rawPageValue);
CGFloat nextPage = (velocity.x > 0.0) ? ceil(rawPageValue) : floor(rawPageValue);
BOOL pannedLessThanAPage = fabs(1 + currentPage - rawPageValue) > 0.5;
BOOL flicked = fabs(velocity.x) > [self flickVelocity];
if (pannedLessThanAPage && flicked) {
proposedContentOffset.x = nextPage * self.pageWidth;
} else {
proposedContentOffset.x = round(rawPageValue) * self.pageWidth;
}
return proposedContentOffset;
}
- (CGFloat)flickVelocity {
return 0.3;
}
Warning: date(): Invalid date.timezone value 'Europe/Kyiv', we selected the timezone 'UTC' for now. in /var/www/agent_stack/data/www/doraprojects.net/template/agent.layouts/content.php on line 54
2014-10-08 23:06:51
Po długich testach znalazłem rozwiązanie, aby przyciągnąć do środka z niestandardową szerokością komórki (każda komórka ma diff. szerokość) co naprawia migotanie. Zapraszam do poprawy skryptu.
- (CGPoint) targetContentOffsetForProposedContentOffset: (CGPoint) proposedContentOffset withScrollingVelocity: (CGPoint)velocity
{
CGFloat offSetAdjustment = MAXFLOAT;
CGFloat horizontalCenter = (CGFloat) (proposedContentOffset.x + (self.collectionView.bounds.size.width / 2.0));
//setting fastPaging property to NO allows to stop at page on screen (I have pages lees, than self.collectionView.bounds.size.width)
CGRect targetRect = CGRectMake(self.fastPaging ? proposedContentOffset.x : self.collectionView.contentOffset.x,
0.0,
self.collectionView.bounds.size.width,
self.collectionView.bounds.size.height);
NSArray *attributes = [self layoutAttributesForElementsInRect:targetRect];
NSPredicate *cellAttributesPredicate = [NSPredicate predicateWithBlock: ^BOOL(UICollectionViewLayoutAttributes * _Nonnull evaluatedObject,
NSDictionary<NSString *,id> * _Nullable bindings)
{
return (evaluatedObject.representedElementCategory == UICollectionElementCategoryCell);
}];
NSArray *cellAttributes = [attributes filteredArrayUsingPredicate: cellAttributesPredicate];
UICollectionViewLayoutAttributes *currentAttributes;
for (UICollectionViewLayoutAttributes *layoutAttributes in cellAttributes)
{
CGFloat itemHorizontalCenter = layoutAttributes.center.x;
if (ABS(itemHorizontalCenter - horizontalCenter) < ABS(offSetAdjustment))
{
currentAttributes = layoutAttributes;
offSetAdjustment = itemHorizontalCenter - horizontalCenter;
}
}
CGFloat nextOffset = proposedContentOffset.x + offSetAdjustment;
proposedContentOffset.x = nextOffset;
CGFloat deltaX = proposedContentOffset.x - self.collectionView.contentOffset.x;
CGFloat velX = velocity.x;
// detection form gist.github.com/rkeniger/7687301
// based on http://stackoverflow.com/a/14291208/740949
if (fabs(deltaX) <= FLT_EPSILON || fabs(velX) <= FLT_EPSILON || (velX > 0.0 && deltaX > 0.0) || (velX < 0.0 && deltaX < 0.0))
{
}
else if (velocity.x > 0.0)
{
// revert the array to get the cells from the right side, fixes not correct center on different size in some usecases
NSArray *revertedArray = [[array reverseObjectEnumerator] allObjects];
BOOL found = YES;
float proposedX = 0.0;
for (UICollectionViewLayoutAttributes *layoutAttributes in revertedArray)
{
if(layoutAttributes.representedElementCategory == UICollectionElementCategoryCell)
{
CGFloat itemHorizontalCenter = layoutAttributes.center.x;
if (itemHorizontalCenter > proposedContentOffset.x) {
found = YES;
proposedX = nextOffset + (currentAttributes.frame.size.width / 2) + (layoutAttributes.frame.size.width / 2);
} else {
break;
}
}
}
// dont set on unfound element
if (found) {
proposedContentOffset.x = proposedX;
}
}
else if (velocity.x < 0.0)
{
for (UICollectionViewLayoutAttributes *layoutAttributes in cellAttributes)
{
CGFloat itemHorizontalCenter = layoutAttributes.center.x;
if (itemHorizontalCenter > proposedContentOffset.x)
{
proposedContentOffset.x = nextOffset - ((currentAttributes.frame.size.width / 2) + (layoutAttributes.frame.size.width / 2));
break;
}
}
}
proposedContentOffset.y = 0.0;
return proposedContentOffset;
}
Warning: date(): Invalid date.timezone value 'Europe/Kyiv', we selected the timezone 'UTC' for now. in /var/www/agent_stack/data/www/doraprojects.net/template/agent.layouts/content.php on line 54
2016-02-18 13:12:01
Podczas gdy ta odpowiedź była dla mnie bardzo pomocna, zauważalne jest migotanie, gdy przesuwa się szybko na małą odległość. O wiele łatwiej jest odtworzyć go na urządzeniu.
Odkryłem, że to się zawsze dzieje, gdy collectionView.contentOffset.x - proposedContentOffset.x
i velocity.x
mają różne piosenki.
Moim rozwiązaniem było zapewnienie, że proposedContentOffset
jest więcej niż contentOffset.x
jeśli prędkość jest dodatnia, a mniej jeśli jest ujemna. Jest w C#, ale powinno być dość proste do przetłumaczenia na Objective C:
public override PointF TargetContentOffset (PointF proposedContentOffset, PointF scrollingVelocity)
{
/* Determine closest edge */
float offSetAdjustment = float.MaxValue;
float horizontalCenter = (float) (proposedContentOffset.X + (this.CollectionView.Bounds.Size.Width / 2.0));
RectangleF targetRect = new RectangleF (proposedContentOffset.X, 0.0f, this.CollectionView.Bounds.Size.Width, this.CollectionView.Bounds.Size.Height);
var array = base.LayoutAttributesForElementsInRect (targetRect);
foreach (var layoutAttributes in array) {
float itemHorizontalCenter = layoutAttributes.Center.X;
if (Math.Abs (itemHorizontalCenter - horizontalCenter) < Math.Abs (offSetAdjustment)) {
offSetAdjustment = itemHorizontalCenter - horizontalCenter;
}
}
float nextOffset = proposedContentOffset.X + offSetAdjustment;
/*
* ... unless we end up having positive speed
* while moving left or negative speed while moving right.
* This will cause flicker so we resort to finding next page
* in the direction of velocity and use it.
*/
do {
proposedContentOffset.X = nextOffset;
float deltaX = proposedContentOffset.X - CollectionView.ContentOffset.X;
float velX = scrollingVelocity.X;
// If their signs are same, or if either is zero, go ahead
if (Math.Sign (deltaX) * Math.Sign (velX) != -1)
break;
// Otherwise, look for the closest page in the right direction
nextOffset += Math.Sign (scrollingVelocity.X) * SnapStep;
} while (IsValidOffset (nextOffset));
return proposedContentOffset;
}
bool IsValidOffset (float offset)
{
return (offset >= MinContentOffset && offset <= MaxContentOffset);
}
Ten kod jest za pomocą MinContentOffset
, MaxContentOffset
i SnapStep
które powinno być trywialne dla Ciebie do zdefiniowania. W moim przypadku okazały się
float MinContentOffset {
get { return -CollectionView.ContentInset.Left; }
}
float MaxContentOffset {
get { return MinContentOffset + CollectionView.ContentSize.Width - ItemSize.Width; }
}
float SnapStep {
get { return ItemSize.Width + MinimumLineSpacing; }
}
Warning: date(): Invalid date.timezone value 'Europe/Kyiv', we selected the timezone 'UTC' for now. in /var/www/agent_stack/data/www/doraprojects.net/template/agent.layouts/content.php on line 54
2017-05-23 10:31:29
Chcę tylko umieścić tutaj szybką wersję zaakceptowanej odpowiedzi.
override func targetContentOffsetForProposedContentOffset(proposedContentOffset: CGPoint, withScrollingVelocity velocity: CGPoint) -> CGPoint {
var offsetAdjustment = CGFloat.greatestFiniteMagnitude
let horizontalOffset = proposedContentOffset.x
let targetRect = CGRect(origin: CGPoint(x: proposedContentOffset.x, y: 0), size: self.collectionView!.bounds.size)
for layoutAttributes in super.layoutAttributesForElements(in: targetRect)! {
let itemOffset = layoutAttributes.frame.origin.x
if (abs(itemOffset - horizontalOffset) < abs(offsetAdjustment)) {
offsetAdjustment = itemOffset - horizontalOffset
}
}
return CGPoint(x: proposedContentOffset.x + offsetAdjustment, y: proposedContentOffset.y)
}
Valid for Swift 3 .
Warning: date(): Invalid date.timezone value 'Europe/Kyiv', we selected the timezone 'UTC' for now. in /var/www/agent_stack/data/www/doraprojects.net/template/agent.layouts/content.php on line 54
2017-03-21 04:28:59
Zobacz Ta odpowiedź dana Abramova oto wersja Swift
override func targetContentOffsetForProposedContentOffset(proposedContentOffset: CGPoint, withScrollingVelocity velocity: CGPoint) -> CGPoint {
var _proposedContentOffset = CGPoint(x: proposedContentOffset.x, y: proposedContentOffset.y)
var offSetAdjustment: CGFloat = CGFloat.max
let horizontalCenter: CGFloat = CGFloat(proposedContentOffset.x + (self.collectionView!.bounds.size.width / 2.0))
let targetRect = CGRect(x: proposedContentOffset.x, y: 0.0, width: self.collectionView!.bounds.size.width, height: self.collectionView!.bounds.size.height)
let array: [UICollectionViewLayoutAttributes] = self.layoutAttributesForElementsInRect(targetRect)! as [UICollectionViewLayoutAttributes]
for layoutAttributes: UICollectionViewLayoutAttributes in array {
if (layoutAttributes.representedElementCategory == UICollectionElementCategory.Cell) {
let itemHorizontalCenter: CGFloat = layoutAttributes.center.x
if (abs(itemHorizontalCenter - horizontalCenter) < abs(offSetAdjustment)) {
offSetAdjustment = itemHorizontalCenter - horizontalCenter
}
}
}
var nextOffset: CGFloat = proposedContentOffset.x + offSetAdjustment
repeat {
_proposedContentOffset.x = nextOffset
let deltaX = proposedContentOffset.x - self.collectionView!.contentOffset.x
let velX = velocity.x
if (deltaX == 0.0 || velX == 0 || (velX > 0.0 && deltaX > 0.0) || (velX < 0.0 && deltaX < 0.0)) {
break
}
if (velocity.x > 0.0) {
nextOffset = nextOffset + self.snapStep()
} else if (velocity.x < 0.0) {
nextOffset = nextOffset - self.snapStep()
}
} while self.isValidOffset(nextOffset)
_proposedContentOffset.y = 0.0
return _proposedContentOffset
}
func isValidOffset(offset: CGFloat) -> Bool {
return (offset >= CGFloat(self.minContentOffset()) && offset <= CGFloat(self.maxContentOffset()))
}
func minContentOffset() -> CGFloat {
return -CGFloat(self.collectionView!.contentInset.left)
}
func maxContentOffset() -> CGFloat {
return CGFloat(self.minContentOffset() + self.collectionView!.contentSize.width - self.itemSize.width)
}
func snapStep() -> CGFloat {
return self.itemSize.width + self.minimumLineSpacing;
}
Lub gist tutaj https://gist.github.com/katopz/8b04c783387f0c345cd9
Warning: date(): Invalid date.timezone value 'Europe/Kyiv', we selected the timezone 'UTC' for now. in /var/www/agent_stack/data/www/doraprojects.net/template/agent.layouts/content.php on line 54
2017-05-23 11:54:58
Oto moje szybkie rozwiązanie w widoku kolekcji przewijanej poziomo. Jest prosty, słodki i unika migotania.
override func targetContentOffsetForProposedContentOffset(proposedContentOffset: CGPoint, withScrollingVelocity velocity: CGPoint) -> CGPoint {
guard let collectionView = collectionView else { return proposedContentOffset }
let currentXOffset = collectionView.contentOffset.x
let nextXOffset = proposedContentOffset.x
let maxIndex = ceil(currentXOffset / pageWidth())
let minIndex = floor(currentXOffset / pageWidth())
var index: CGFloat = 0
if nextXOffset > currentXOffset {
index = maxIndex
} else {
index = minIndex
}
let xOffset = pageWidth() * index
let point = CGPointMake(xOffset, 0)
return point
}
func pageWidth() -> CGFloat {
return itemSize.width + minimumInteritemSpacing
}
Warning: date(): Invalid date.timezone value 'Europe/Kyiv', we selected the timezone 'UTC' for now. in /var/www/agent_stack/data/www/doraprojects.net/template/agent.layouts/content.php on line 54
2016-07-28 23:58:10
Dla każdego, kto szuka rozwiązania, które...
- nie powoduje usterki, gdy użytkownik wykonuje krótkie szybkie przewijanie (tzn. bierze pod uwagę dodatnie i ujemne prędkości przewijania)
- bierze pod uwagę
collectionView.contentInset
(i safeArea na iPhone X) - uwzględnia tylko komórki thoes widoczne w punkcie przewijania (dla peformancji)
- używa dobrze nazwanych zmiennych i komentarzy
- jest Swift 4
Zobacz poniżej...
public class CarouselCollectionViewLayout: UICollectionViewFlowLayout {
override public func targetContentOffset(forProposedContentOffset proposedContentOffset: CGPoint, withScrollingVelocity velocity: CGPoint) -> CGPoint {
guard let collectionView = collectionView else {
return super.targetContentOffset(forProposedContentOffset: proposedContentOffset, withScrollingVelocity: velocity)
}
// Identify the layoutAttributes of cells in the vicinity of where the scroll view will come to rest
let targetRect = CGRect(origin: proposedContentOffset, size: collectionView.bounds.size)
let visibleCellsLayoutAttributes = layoutAttributesForElements(in: targetRect)
// Translate those cell layoutAttributes into potential (candidate) scrollView offsets
let candidateOffsets: [CGFloat]? = visibleCellsLayoutAttributes?.map({ cellLayoutAttributes in
if #available(iOS 11.0, *) {
return cellLayoutAttributes.frame.origin.x - collectionView.contentInset.left - collectionView.safeAreaInsets.left
} else {
return cellLayoutAttributes.frame.origin.x - collectionView.contentInset.left
}
})
// Now we need to work out which one of the candidate offsets is the best one
let bestCandidateOffset: CGFloat
if velocity.x > 0 {
// If the scroll velocity was POSITIVE, then only consider cells/offsets to the RIGHT of the proposedContentOffset.x
// Of the cells/offsets to the right, the NEAREST is the `bestCandidate`
// If there is no nearestCandidateOffsetToLeft then we default to the RIGHT-MOST (last) of ALL the candidate cells/offsets
// (this handles the scenario where the user has scrolled beyond the last cell)
let candidateOffsetsToRight = candidateOffsets?.toRight(ofProposedOffset: proposedContentOffset.x)
let nearestCandidateOffsetToRight = candidateOffsetsToRight?.nearest(toProposedOffset: proposedContentOffset.x)
bestCandidateOffset = nearestCandidateOffsetToRight ?? candidateOffsets?.last ?? proposedContentOffset.x
}
else if velocity.x < 0 {
// If the scroll velocity was NEGATIVE, then only consider cells/offsets to the LEFT of the proposedContentOffset.x
// Of the cells/offsets to the left, the NEAREST is the `bestCandidate`
// If there is no nearestCandidateOffsetToLeft then we default to the LEFT-MOST (first) of ALL the candidate cells/offsets
// (this handles the scenario where the user has scrolled beyond the first cell)
let candidateOffsetsToLeft = candidateOffsets?.toLeft(ofProposedOffset: proposedContentOffset.x)
let nearestCandidateOffsetToLeft = candidateOffsetsToLeft?.nearest(toProposedOffset: proposedContentOffset.x)
bestCandidateOffset = nearestCandidateOffsetToLeft ?? candidateOffsets?.first ?? proposedContentOffset.x
}
else {
// If the scroll velocity was ZERO we consider all `candidate` cells (regarless of whether they are to the left OR right of the proposedContentOffset.x)
// The cell/offset that is the NEAREST is the `bestCandidate`
let nearestCandidateOffset = candidateOffsets?.nearest(toProposedOffset: proposedContentOffset.x)
bestCandidateOffset = nearestCandidateOffset ?? proposedContentOffset.x
}
return CGPoint(x: bestCandidateOffset, y: proposedContentOffset.y)
}
}
fileprivate extension Sequence where Iterator.Element == CGFloat {
func toLeft(ofProposedOffset proposedOffset: CGFloat) -> [CGFloat] {
return filter() { candidateOffset in
return candidateOffset < proposedOffset
}
}
func toRight(ofProposedOffset proposedOffset: CGFloat) -> [CGFloat] {
return filter() { candidateOffset in
return candidateOffset > proposedOffset
}
}
func nearest(toProposedOffset proposedOffset: CGFloat) -> CGFloat? {
guard let firstCandidateOffset = first(where: { _ in true }) else {
// If there are no elements in the Sequence, return nil
return nil
}
return reduce(firstCandidateOffset) { (bestCandidateOffset: CGFloat, candidateOffset: CGFloat) -> CGFloat in
let candidateOffsetDistanceFromProposed = fabs(candidateOffset - proposedOffset)
let bestCandidateOffsetDistancFromProposed = fabs(bestCandidateOffset - proposedOffset)
if candidateOffsetDistanceFromProposed < bestCandidateOffsetDistancFromProposed {
return candidateOffset
}
return bestCandidateOffset
}
}
}
Warning: date(): Invalid date.timezone value 'Europe/Kyiv', we selected the timezone 'UTC' for now. in /var/www/agent_stack/data/www/doraprojects.net/template/agent.layouts/content.php on line 54
2018-03-27 10:50:55
Mały problem, który napotkałem podczas korzystania z targetContentOffsetForProposedContentoffset, polega na tym, że ostatnia komórka nie dostosowuje się zgodnie z nowym punktem, który zwróciłem.
Okazało się, że cgpoint, który zwróciłem, miał wartość Y większą niż dozwolona, więc użyłem następującego kodu na końcu implementacji targetContentOffsetForProposedContentoffset:
// if the calculated y is bigger then the maximum possible y we adjust accordingly
CGFloat contentHeight = self.collectionViewContentSize.height;
CGFloat collectionViewHeight = self.collectionView.bounds.size.height;
CGFloat maxY = contentHeight - collectionViewHeight;
if (newY > maxY)
{
newY = maxY;
}
return CGPointMake(0, newY);
Żeby było jaśniej, jest to moja pełna implementacja layoutu, która imituje pionowe stronicowanie zachowanie:
- (CGPoint)targetContentOffsetForProposedContentOffset:(CGPoint)proposedContentOffset withScrollingVelocity:(CGPoint)velocity
{
return [self targetContentOffsetForProposedContentOffset:proposedContentOffset];
}
- (CGPoint)targetContentOffsetForProposedContentOffset:(CGPoint)proposedContentOffset
{
CGFloat heightOfPage = self.itemSize.height;
CGFloat heightOfSpacing = self.minimumLineSpacing;
CGFloat numOfPage = lround(proposedContentOffset.y / (heightOfPage + heightOfSpacing));
CGFloat newY = numOfPage * (heightOfPage + heightOfSpacing);
// if the calculated y is bigger then the maximum possible y we adjust accordingly
CGFloat contentHeight = self.collectionViewContentSize.height;
CGFloat collectionViewHeight = self.collectionView.bounds.size.height;
CGFloat maxY = contentHeight - collectionViewHeight;
if (newY > maxY)
{
newY = maxY;
}
return CGPointMake(0, newY);
}
Mam nadzieję, że to zaoszczędzi komuś czasu i bólu głowy
Warning: date(): Invalid date.timezone value 'Europe/Kyiv', we selected the timezone 'UTC' for now. in /var/www/agent_stack/data/www/doraprojects.net/template/agent.layouts/content.php on line 54
2013-12-26 09:53:37
Wolę pozwolić użytkownikowi przeskakiwać przez kilka stron. Oto moja wersja targetContentOffsetForProposedContentOffset
(która bazuje na odpowiedzi DarthMike) dla vertical layout.
- (CGPoint)targetContentOffsetForProposedContentOffset:(CGPoint)proposedContentOffset withScrollingVelocity:(CGPoint)velocity {
CGFloat approximatePage = self.collectionView.contentOffset.y / self.pageHeight;
CGFloat currentPage = (velocity.y < 0.0) ? floor(approximatePage) : ceil(approximatePage);
NSInteger flickedPages = ceil(velocity.y / self.flickVelocity);
if (flickedPages) {
proposedContentOffset.y = (currentPage + flickedPages) * self.pageHeight;
} else {
proposedContentOffset.y = currentPage * self.pageHeight;
}
return proposedContentOffset;
}
- (CGFloat)pageHeight {
return self.itemSize.height + self.minimumLineSpacing;
}
- (CGFloat)flickVelocity {
return 1.2;
}
Warning: date(): Invalid date.timezone value 'Europe/Kyiv', we selected the timezone 'UTC' for now. in /var/www/agent_stack/data/www/doraprojects.net/template/agent.layouts/content.php on line 54
2015-02-18 12:54:38
Oto moja implementacja w Swift 4.1 dla pionowego stronicowania opartego na komórkach (jak wspomniano w komentarzach, nie zapomnij ustawić domyślnego stronicowania na false!):
override func targetContentOffset(forProposedContentOffset proposedContentOffset: CGPoint, withScrollingVelocity velocity: CGPoint) -> CGPoint {
// Page height used for estimating and calculating paging.
let pageHeight = self.itemSize.height + self.minimumLineSpacing
// Make an estimation of the current page position.
let approximatePage = self.collectionView!.contentOffset.y/pageHeight
// Determine the current page based on velocity.
let currentPage = (velocity.y < 0.0) ? floor(approximatePage) : ceil(approximatePage)
// Create custom flickVelocity.
let flickVelocity = velocity.y * 0.3
// Check how many pages the user flicked, if <= 1 then flickedPages should return 0.
let flickedPages = (abs(round(flickVelocity)) <= 1) ? 0 : round(flickVelocity)
let newVerticalOffset = ((currentPage + flickedPages) * pageHeight) - self.collectionView!.contentInset.top
return CGPoint(x: proposedContentOffset.x, y: newVerticalOffset)
}
To nie powinno usterkować i pozwala łatwo ustawić własną flickvelocity.
Edit: Oto wersja horizontal (nie testowałem dokładnie, więc proszę wybaczyć błędy):
override func targetContentOffset(forProposedContentOffset proposedContentOffset: CGPoint, withScrollingVelocity velocity: CGPoint) -> CGPoint {
// Page width used for estimating and calculating paging.
let pageWidth = self.itemSize.width + self.minimumInteritemSpacing
// Make an estimation of the current page position.
let approximatePage = self.collectionView!.contentOffset.x/pageWidth
// Determine the current page based on velocity.
let currentPage = (velocity.x < 0.0) ? floor(approximatePage) : ceil(approximatePage)
// Create custom flickVelocity.
let flickVelocity = velocity.x * 0.3
// Check how many pages the user flicked, if <= 1 then flickedPages should return 0.
let flickedPages = (abs(round(flickVelocity)) <= 1) ? 0 : round(flickVelocity)
// Calculate newHorizontalOffset.
let newHorizontalOffset = ((currentPage + flickedPages) * pageWidth) - self.collectionView!.contentInset.left
return CGPoint(x: newHorizontalOffset, y: proposedContentOffset.y)
}
Warning: date(): Invalid date.timezone value 'Europe/Kyiv', we selected the timezone 'UTC' for now. in /var/www/agent_stack/data/www/doraprojects.net/template/agent.layouts/content.php on line 54
2018-08-23 11:37:23
ODPOWIEDŹ Fogmeisters zadziałała dla mnie, chyba że przewijałem do końca wiersza. Moje komórki nie pasują starannie na ekranie, więc przewijało się do końca i skakało z szarpnięciem, aby ostatnia komórka zawsze nakładała się na prawą krawędź ekranu.
Aby temu zapobiec Dodaj następujący wiersz kodu na początku metody targetcontentoffset
if(proposedContentOffset.x>self.collectionViewContentSize.width-320-self.sectionInset.right)
return proposedContentOffset;
Warning: date(): Invalid date.timezone value 'Europe/Kyiv', we selected the timezone 'UTC' for now. in /var/www/agent_stack/data/www/doraprojects.net/template/agent.layouts/content.php on line 54
2013-01-29 16:53:26
@André Abreu ' S Code
Swift3 wersja
class CustomCollectionViewFlowLayout: UICollectionViewFlowLayout {
override func targetContentOffset(forProposedContentOffset proposedContentOffset: CGPoint, withScrollingVelocity velocity: CGPoint) -> CGPoint {
var offsetAdjustment = CGFloat.greatestFiniteMagnitude
let horizontalOffset = proposedContentOffset.x
let targetRect = CGRect(x: proposedContentOffset.x, y: 0, width: self.collectionView!.bounds.size.width, height: self.collectionView!.bounds.size.height)
for layoutAttributes in super.layoutAttributesForElements(in: targetRect)! {
let itemOffset = layoutAttributes.frame.origin.x
if abs(itemOffset - horizontalOffset) < abs(offsetAdjustment){
offsetAdjustment = itemOffset - horizontalOffset
}
}
return CGPoint(x: proposedContentOffset.x + offsetAdjustment, y: proposedContentOffset.y)
}
}
Warning: date(): Invalid date.timezone value 'Europe/Kyiv', we selected the timezone 'UTC' for now. in /var/www/agent_stack/data/www/doraprojects.net/template/agent.layouts/content.php on line 54
2017-01-31 10:43:29
Swift 4
Najprostsze rozwiązanie dla widoku kolekcji z komórkami o jednym rozmiarze (przewijanie poziome):
override func targetContentOffset(forProposedContentOffset proposedContentOffset: CGPoint, withScrollingVelocity velocity: CGPoint) -> CGPoint {
guard let collectionView = collectionView else { return proposedContentOffset }
// Calculate width of your page
let pageWidth = calculatedPageWidth()
// Calculate proposed page
let proposedPage = round(proposedContentOffset.x / pageWidth)
// Adjust necessary offset
let xOffset = pageWidth * proposedPage - collectionView.contentInset.left
return CGPoint(x: xOffset, y: 0)
}
func calculatedPageWidth() -> CGFloat {
return itemSize.width + minimumInteritemSpacing
}
Warning: date(): Invalid date.timezone value 'Europe/Kyiv', we selected the timezone 'UTC' for now. in /var/www/agent_stack/data/www/doraprojects.net/template/agent.layouts/content.php on line 54
2017-09-20 21:35:11
Krótsze rozwiązanie (zakładając, że buforujesz atrybuty układu):
override func targetContentOffset(forProposedContentOffset proposedContentOffset: CGPoint, withScrollingVelocity velocity: CGPoint) -> CGPoint {
let proposedEndFrame = CGRect(x: proposedContentOffset.x, y: 0, width: collectionView!.bounds.width, height: collectionView!.bounds.height)
let targetLayoutAttributes = cache.max { $0.frame.intersection(proposedEndFrame).width < $1.frame.intersection(proposedEndFrame).width }!
return CGPoint(x: targetLayoutAttributes.frame.minX - horizontalPadding, y: 0)
}
Aby umieścić to w kontekście:
class Layout : UICollectionViewLayout {
private var cache: [UICollectionViewLayoutAttributes] = []
private static let horizontalPadding: CGFloat = 16
private static let interItemSpacing: CGFloat = 8
override func prepare() {
let (itemWidth, itemHeight) = (collectionView!.bounds.width - 2 * Layout.horizontalPadding, collectionView!.bounds.height)
cache.removeAll()
let count = collectionView!.numberOfItems(inSection: 0)
var x: CGFloat = Layout.horizontalPadding
for item in (0..<count) {
let indexPath = IndexPath(item: item, section: 0)
let attributes = UICollectionViewLayoutAttributes(forCellWith: indexPath)
attributes.frame = CGRect(x: x, y: 0, width: itemWidth, height: itemHeight)
cache.append(attributes)
x += itemWidth + Layout.interItemSpacing
}
}
override var collectionViewContentSize: CGSize {
let width: CGFloat
if let maxX = cache.last?.frame.maxX {
width = maxX + Layout.horizontalPadding
} else {
width = collectionView!.width
}
return CGSize(width: width, height: collectionView!.height)
}
override func layoutAttributesForItem(at indexPath: IndexPath) -> UICollectionViewLayoutAttributes? {
return cache.first { $0.indexPath == indexPath }
}
override func layoutAttributesForElements(in rect: CGRect) -> [UICollectionViewLayoutAttributes]? {
return cache.filter { $0.frame.intersects(rect) }
}
override func targetContentOffset(forProposedContentOffset proposedContentOffset: CGPoint, withScrollingVelocity velocity: CGPoint) -> CGPoint {
let proposedEndFrame = CGRect(x: proposedContentOffset.x, y: 0, width: collectionView!.bounds.width, height: collectionView!.bounds.height)
let targetLayoutAttributes = cache.max { $0.frame.intersection(proposedEndFrame).width < $1.frame.intersection(proposedEndFrame).width }!
return CGPoint(x: targetLayoutAttributes.frame.minX - Layout.horizontalPadding, y: 0)
}
}
Warning: date(): Invalid date.timezone value 'Europe/Kyiv', we selected the timezone 'UTC' for now. in /var/www/agent_stack/data/www/doraprojects.net/template/agent.layouts/content.php on line 54
2017-09-23 11:56:28
Dla tych, którzy szukają rozwiązania w języku Swift:
class CustomCollectionViewFlowLayout: UICollectionViewFlowLayout {
private let collectionViewHeight: CGFloat = 200.0
private let screenWidth: CGFloat = UIScreen.mainScreen().bounds.width
override func awakeFromNib() {
super.awakeFromNib()
self.itemSize = CGSize(width: [InsertItemWidthHere], height: [InsertItemHeightHere])
self.minimumInteritemSpacing = [InsertItemSpacingHere]
self.scrollDirection = .Horizontal
let inset = (self.screenWidth - CGFloat(self.itemSize.width)) / 2
self.collectionView?.contentInset = UIEdgeInsets(top: 0,
left: inset,
bottom: 0,
right: inset)
}
override func targetContentOffsetForProposedContentOffset(proposedContentOffset: CGPoint, withScrollingVelocity velocity: CGPoint) -> CGPoint {
var offsetAdjustment = CGFloat.max
let horizontalOffset = proposedContentOffset.x + ((self.screenWidth - self.itemSize.width) / 2)
let targetRect = CGRect(x: proposedContentOffset.x, y: 0, width: self.screenWidth, height: self.collectionViewHeight)
var array = super.layoutAttributesForElementsInRect(targetRect)
for layoutAttributes in array! {
let itemOffset = layoutAttributes.frame.origin.x
if (abs(itemOffset - horizontalOffset) < abs(offsetAdjustment)) {
offsetAdjustment = itemOffset - horizontalOffset
}
}
return CGPoint(x: proposedContentOffset.x + offsetAdjustment, y: proposedContentOffset.y)
}
}
Warning: date(): Invalid date.timezone value 'Europe/Kyiv', we selected the timezone 'UTC' for now. in /var/www/agent_stack/data/www/doraprojects.net/template/agent.layouts/content.php on line 54
2016-09-13 15:54:56