Różnica w miesiącach między dwoma datami
Jak obliczyć różnicę w miesiącach między dwoma datami w C#?
Jest odpowiednikiem metody VB DateDiff()
W C#. Muszę znaleźć różnicę w miesiącach między dwiema datami, które są odległe od siebie o lata. Dokumentacja mówi, że mogę używać TimeSpan
Jak:
TimeSpan ts = date1 - date2;
Ale to daje mi dane w kilka dni. nie chcę dzielić tej liczby przez 30 ponieważ nie każdy miesiąc to 30 dni, a ponieważ wartości tych dwóch operandów są od siebie całkiem różne, obawiam się, że dzielenie przez 30 może podaj mi złą wartość.
Jakieś sugestie? 30 answers
Zakładając, że dzień miesiąca jest nieistotny (tzn. różnica między 2011.1.1 a 2010.12.31 wynosi 1), przy czym date1 > date2 daje wartość dodatnią, a date2 > date1 wartość ujemną
((date1.Year - date2.Year) * 12) + date1.Month - date2.Month
Lub, zakładając, że chcesz przybliżoną liczbę "średnich miesięcy" między dwoma datami, poniższe powinny działać dla wszystkich, ale bardzo dużych różnic daty.
date1.Subtract(date2).Days / (365.25 / 12)
Zauważ, że jeśli chcesz użyć tego drugiego rozwiązania, twoje testy jednostkowe powinny określać najszerszy zakres dat, jaki znajduje się w Twojej aplikacji zaprojektowany do pracy z wynikami obliczeń i ich walidacji.
Update (with thanks to Gary)
Jeśli stosuje się metodę "średnich miesięcy", nieco dokładniejszą liczbę do wykorzystania dla "średniej liczby dni w roku" jest 365.2425.
Warning: date(): Invalid date.timezone value 'Europe/Kyiv', we selected the timezone 'UTC' for now. in /var/www/agent_stack/data/www/doraprojects.net/template/agent.layouts/content.php on line 54
2017-09-03 07:56:18
Oto kompleksowe rozwiązanie zwracające DateTimeSpan
, podobne do TimeSpan
, z tym że zawiera wszystkie składniki daty oprócz składników czasu.
Użycie:
void Main()
{
DateTime compareTo = DateTime.Parse("8/13/2010 8:33:21 AM");
DateTime now = DateTime.Parse("2/9/2012 10:10:11 AM");
var dateSpan = DateTimeSpan.CompareDates(compareTo, now);
Console.WriteLine("Years: " + dateSpan.Years);
Console.WriteLine("Months: " + dateSpan.Months);
Console.WriteLine("Days: " + dateSpan.Days);
Console.WriteLine("Hours: " + dateSpan.Hours);
Console.WriteLine("Minutes: " + dateSpan.Minutes);
Console.WriteLine("Seconds: " + dateSpan.Seconds);
Console.WriteLine("Milliseconds: " + dateSpan.Milliseconds);
}
Wyjścia:
Lat: 1
Miesięcy: 5
Dni: 27
Godziny: 1
Minut: 36
Sekund: 50
Milisekundy: 0
Dla wygody, dodałem logikę do struktury DateTimeSpan
, ale możesz przenieść metodę CompareDates
gdziekolwiek uznasz to za stosowne. Również uwaga, nie ma znaczenia, która Data jest przed drugą.
public struct DateTimeSpan
{
private readonly int years;
private readonly int months;
private readonly int days;
private readonly int hours;
private readonly int minutes;
private readonly int seconds;
private readonly int milliseconds;
public DateTimeSpan(int years, int months, int days, int hours, int minutes, int seconds, int milliseconds)
{
this.years = years;
this.months = months;
this.days = days;
this.hours = hours;
this.minutes = minutes;
this.seconds = seconds;
this.milliseconds = milliseconds;
}
public int Years { get { return years; } }
public int Months { get { return months; } }
public int Days { get { return days; } }
public int Hours { get { return hours; } }
public int Minutes { get { return minutes; } }
public int Seconds { get { return seconds; } }
public int Milliseconds { get { return milliseconds; } }
enum Phase { Years, Months, Days, Done }
public static DateTimeSpan CompareDates(DateTime date1, DateTime date2)
{
if (date2 < date1)
{
var sub = date1;
date1 = date2;
date2 = sub;
}
DateTime current = date1;
int years = 0;
int months = 0;
int days = 0;
Phase phase = Phase.Years;
DateTimeSpan span = new DateTimeSpan();
int officialDay = current.Day;
while (phase != Phase.Done)
{
switch (phase)
{
case Phase.Years:
if (current.AddYears(years + 1) > date2)
{
phase = Phase.Months;
current = current.AddYears(years);
}
else
{
years++;
}
break;
case Phase.Months:
if (current.AddMonths(months + 1) > date2)
{
phase = Phase.Days;
current = current.AddMonths(months);
if (current.Day < officialDay && officialDay <= DateTime.DaysInMonth(current.Year, current.Month))
current = current.AddDays(officialDay - current.Day);
}
else
{
months++;
}
break;
case Phase.Days:
if (current.AddDays(days + 1) > date2)
{
current = current.AddDays(days);
var timespan = date2 - current;
span = new DateTimeSpan(years, months, days, timespan.Hours, timespan.Minutes, timespan.Seconds, timespan.Milliseconds);
phase = Phase.Done;
}
else
{
days++;
}
break;
}
}
return span;
}
}
Warning: date(): Invalid date.timezone value 'Europe/Kyiv', we selected the timezone 'UTC' for now. in /var/www/agent_stack/data/www/doraprojects.net/template/agent.layouts/content.php on line 54
2016-04-02 21:44:12
Jeśli chcesz dokładną liczbę pełnych miesięcy, zawsze dodatni (2000-01-15, 2000-02-14 zwraca 0), biorąc pod uwagę, że pełny miesiąc jest wtedy, gdy osiągniesz ten sam dzień następnego miesiąca (coś jak obliczenie wieku)
public static int GetMonthsBetween(DateTime from, DateTime to)
{
if (from > to) return GetMonthsBetween(to, from);
var monthDiff = Math.Abs((to.Year * 12 + (to.Month - 1)) - (from.Year * 12 + (from.Month - 1)));
if (from.AddMonths(monthDiff) > to || to.Day < from.Day)
{
return monthDiff - 1;
}
else
{
return monthDiff;
}
}
Powód edycji: stary kod nie był poprawny w niektórych przypadkach jak:
new { From = new DateTime(1900, 8, 31), To = new DateTime(1901, 8, 30), Result = 11 },
Test cases I used to test the function:
var tests = new[]
{
new { From = new DateTime(1900, 1, 1), To = new DateTime(1900, 1, 1), Result = 0 },
new { From = new DateTime(1900, 1, 1), To = new DateTime(1900, 1, 2), Result = 0 },
new { From = new DateTime(1900, 1, 2), To = new DateTime(1900, 1, 1), Result = 0 },
new { From = new DateTime(1900, 1, 1), To = new DateTime(1900, 2, 1), Result = 1 },
new { From = new DateTime(1900, 2, 1), To = new DateTime(1900, 1, 1), Result = 1 },
new { From = new DateTime(1900, 1, 31), To = new DateTime(1900, 2, 1), Result = 0 },
new { From = new DateTime(1900, 8, 31), To = new DateTime(1900, 9, 30), Result = 0 },
new { From = new DateTime(1900, 8, 31), To = new DateTime(1900, 10, 1), Result = 1 },
new { From = new DateTime(1900, 1, 1), To = new DateTime(1901, 1, 1), Result = 12 },
new { From = new DateTime(1900, 1, 1), To = new DateTime(1911, 1, 1), Result = 132 },
new { From = new DateTime(1900, 8, 31), To = new DateTime(1901, 8, 30), Result = 11 },
};
Warning: date(): Invalid date.timezone value 'Europe/Kyiv', we selected the timezone 'UTC' for now. in /var/www/agent_stack/data/www/doraprojects.net/template/agent.layouts/content.php on line 54
2018-03-03 07:10:35
You could do
if ( date1.AddMonths(x) > date2 )
Warning: date(): Invalid date.timezone value 'Europe/Kyiv', we selected the timezone 'UTC' for now. in /var/www/agent_stack/data/www/doraprojects.net/template/agent.layouts/content.php on line 54
2011-09-20 16:36:26
Sprawdziłem użycie tej metody w VB.NET przez MSDN i wydaje się, że ma wiele zastosowań. Nie ma takiej wbudowanej metody w C#. (Nawet to nie jest dobry pomysł) możesz wywołać VB w C#.
- Dodaj
Microsoft.VisualBasic.dll
do Twój projekt jako odniesienie - użycie
Microsoft.VisualBasic.DateAndTime.DateDiff
w Twoim kodzie
Warning: date(): Invalid date.timezone value 'Europe/Kyiv', we selected the timezone 'UTC' for now. in /var/www/agent_stack/data/www/doraprojects.net/template/agent.layouts/content.php on line 54
2011-01-09 12:19:41
Aby uzyskać różnicę w miesiącach (zarówno Początek, jak i koniec włącznie), niezależnie od dat:
DateTime start = new DateTime(2013, 1, 1);
DateTime end = new DateTime(2014, 2, 1);
var diffMonths = (end.Month + end.Year * 12) - (start.Month + start.Year * 12);
Warning: date(): Invalid date.timezone value 'Europe/Kyiv', we selected the timezone 'UTC' for now. in /var/www/agent_stack/data/www/doraprojects.net/template/agent.layouts/content.php on line 54
2014-12-19 10:44:40
Po prostu potrzebowałem czegoś prostego, aby zaspokoić np. daty zatrudnienia, w których wpisywany jest tylko miesiąc/rok, więc chciałem różne lata i miesiące przepracowane. To jest to, czego używam, tutaj tylko dla użyteczności
public static YearsMonths YearMonthDiff(DateTime startDate, DateTime endDate) {
int monthDiff = ((endDate.Year * 12) + endDate.Month) - ((startDate.Year * 12) + startDate.Month) + 1;
int years = (int)Math.Floor((decimal) (monthDiff / 12));
int months = monthDiff % 12;
return new YearsMonths {
TotalMonths = monthDiff,
Years = years,
Months = months
};
}
Warning: date(): Invalid date.timezone value 'Europe/Kyiv', we selected the timezone 'UTC' for now. in /var/www/agent_stack/data/www/doraprojects.net/template/agent.layouts/content.php on line 54
2018-03-03 17:13:50
Możesz użyć klasy DateDiff z biblioteki Time Period dla. Net :
// ----------------------------------------------------------------------
public void DateDiffSample()
{
DateTime date1 = new DateTime( 2009, 11, 8, 7, 13, 59 );
DateTime date2 = new DateTime( 2011, 3, 20, 19, 55, 28 );
DateDiff dateDiff = new DateDiff( date1, date2 );
// differences
Console.WriteLine( "DateDiff.Months: {0}", dateDiff.Months );
// > DateDiff.Months: 16
// elapsed
Console.WriteLine( "DateDiff.ElapsedMonths: {0}", dateDiff.ElapsedMonths );
// > DateDiff.ElapsedMonths: 4
// description
Console.WriteLine( "DateDiff.GetDescription(6): {0}", dateDiff.GetDescription( 6 ) );
// > DateDiff.GetDescription(6): 1 Year 4 Months 12 Days 12 Hours 41 Mins 29 Secs
} // DateDiffSample
Użyj Noda Time :
LocalDate start = new LocalDate(2013, 1, 5);
LocalDate end = new LocalDate(2014, 6, 1);
Period period = Period.Between(start, end, PeriodUnits.Months);
Console.WriteLine(period.Months); // 16
Warning: date(): Invalid date.timezone value 'Europe/Kyiv', we selected the timezone 'UTC' for now. in /var/www/agent_stack/data/www/doraprojects.net/template/agent.layouts/content.php on line 54
2017-05-23 12:02:46
To zadziałało na to, czego potrzebowałem. W moim przypadku dzień miesiąca nie miał znaczenia, ponieważ zawsze jest to ostatni dzień miesiąca.
public static int MonthDiff(DateTime d1, DateTime d2){
int retVal = 0;
if (d1.Month<d2.Month)
{
retVal = (d1.Month + 12) - d2.Month;
retVal += ((d1.Year - 1) - d2.Year)*12;
}
else
{
retVal = d1.Month - d2.Month;
retVal += (d1.Year - d2.Year)*12;
}
//// Calculate the number of years represented and multiply by 12
//// Substract the month number from the total
//// Substract the difference of the second month and 12 from the total
//retVal = (d1.Year - d2.Year) * 12;
//retVal = retVal - d1.Month;
//retVal = retVal - (12 - d2.Month);
return retVal;
}
Warning: date(): Invalid date.timezone value 'Europe/Kyiv', we selected the timezone 'UTC' for now. in /var/www/agent_stack/data/www/doraprojects.net/template/agent.layouts/content.php on line 54
2018-03-03 04:16:03
Najbardziej precyzyjnym sposobem jest to, że różnica zwrotu w miesiącach przez ułamek:
private double ReturnDiffereceBetweenTwoDatesInMonths(DateTime startDateTime, DateTime endDateTime)
{
double result = 0;
double days = 0;
DateTime currentDateTime = startDateTime;
while (endDateTime > currentDateTime.AddMonths(1))
{
result ++;
currentDateTime = currentDateTime.AddMonths(1);
}
if (endDateTime > currentDateTime)
{
days = endDateTime.Subtract(currentDateTime).TotalDays;
}
return result + days/endDateTime.GetMonthDays;
}
Warning: date(): Invalid date.timezone value 'Europe/Kyiv', we selected the timezone 'UTC' for now. in /var/www/agent_stack/data/www/doraprojects.net/template/agent.layouts/content.php on line 54
2018-03-03 09:50:40
Oto proste rozwiązanie, które działa przynajmniej dla mnie. Prawdopodobnie nie jest to najszybszy, ponieważ używa fajnej funkcji AddMonth DateTime w pętli:
public static int GetMonthsDiff(DateTime start, DateTime end)
{
if (start > end)
return GetMonthsDiff(end, start);
int months = 0;
do
{
start = start.AddMonths(1);
if (start > end)
return months;
months++;
}
while (true);
}
Warning: date(): Invalid date.timezone value 'Europe/Kyiv', we selected the timezone 'UTC' for now. in /var/www/agent_stack/data/www/doraprojects.net/template/agent.layouts/content.php on line 54
2018-03-04 07:55:47
Public Class ClassDateOperation
Private prop_DifferenceInDay As Integer
Private prop_DifferenceInMonth As Integer
Private prop_DifferenceInYear As Integer
Public Function DayMonthYearFromTwoDate(ByVal DateStart As Date, ByVal DateEnd As Date) As ClassDateOperation
Dim differenceInDay As Integer
Dim differenceInMonth As Integer
Dim differenceInYear As Integer
Dim myDate As Date
DateEnd = DateEnd.AddDays(1)
differenceInYear = DateEnd.Year - DateStart.Year
If DateStart.Month <= DateEnd.Month Then
differenceInMonth = DateEnd.Month - DateStart.Month
Else
differenceInYear -= 1
differenceInMonth = (12 - DateStart.Month) + DateEnd.Month
End If
If DateStart.Day <= DateEnd.Day Then
differenceInDay = DateEnd.Day - DateStart.Day
Else
myDate = CDate("01/" & DateStart.AddMonths(1).Month & "/" & DateStart.Year).AddDays(-1)
If differenceInMonth <> 0 Then
differenceInMonth -= 1
Else
differenceInMonth = 11
differenceInYear -= 1
End If
differenceInDay = myDate.Day - DateStart.Day + DateEnd.Day
End If
prop_DifferenceInDay = differenceInDay
prop_DifferenceInMonth = differenceInMonth
prop_DifferenceInYear = differenceInYear
Return Me
End Function
Public ReadOnly Property DifferenceInDay() As Integer
Get
Return prop_DifferenceInDay
End Get
End Property
Public ReadOnly Property DifferenceInMonth As Integer
Get
Return prop_DifferenceInMonth
End Get
End Property
Public ReadOnly Property DifferenceInYear As Integer
Get
Return prop_DifferenceInYear
End Get
End Property
End Class
Warning: date(): Invalid date.timezone value 'Europe/Kyiv', we selected the timezone 'UTC' for now. in /var/www/agent_stack/data/www/doraprojects.net/template/agent.layouts/content.php on line 54
2011-08-14 14:16:37
To jest z mojej własnej biblioteki, zwróci różnicę miesięcy między dwoma datami.
public static int MonthDiff(DateTime d1, DateTime d2)
{
int retVal = 0;
// Calculate the number of years represented and multiply by 12
// Substract the month number from the total
// Substract the difference of the second month and 12 from the total
retVal = (d1.Year - d2.Year) * 12;
retVal = retVal - d1.Month;
retVal = retVal - (12 - d2.Month);
return retVal;
}
Warning: date(): Invalid date.timezone value 'Europe/Kyiv', we selected the timezone 'UTC' for now. in /var/www/agent_stack/data/www/doraprojects.net/template/agent.layouts/content.php on line 54
2012-04-25 13:25:09
Możesz mieć funkcję podobną do tej.
Na przykład od 2012/12/27 do 2012/12/29 trwa 3 dni. Podobnie, od 2012/12/15 do 2013/01/15 trwa 2 miesiące, ponieważ do 2013/01/14 wynosi 1 miesiąc. od 15-go zaczyna się drugi miesiąc.
Możesz usunąć " = " w drugim warunku if, jeśli nie chcesz uwzględniać obu dni w obliczeniach. tj. od 2012/12/15 do 2013/01/15 wynosi 1 miesiąc.
public int GetMonths(DateTime startDate, DateTime endDate)
{
if (startDate > endDate)
{
throw new Exception("Start Date is greater than the End Date");
}
int months = ((endDate.Year * 12) + endDate.Month) - ((startDate.Year * 12) + startDate.Month);
if (endDate.Day >= startDate.Day)
{
months++;
}
return months;
}
Warning: date(): Invalid date.timezone value 'Europe/Kyiv', we selected the timezone 'UTC' for now. in /var/www/agent_stack/data/www/doraprojects.net/template/agent.layouts/content.php on line 54
2012-12-27 10:43:41
Możesz użyć następującego rozszerzenia: kod
public static class Ext
{
#region Public Methods
public static int GetAge(this DateTime @this)
{
var today = DateTime.Today;
return ((((today.Year - @this.Year) * 100) + (today.Month - @this.Month)) * 100 + today.Day - @this.Day) / 10000;
}
public static int DiffMonths(this DateTime @from, DateTime @to)
{
return (((((@to.Year - @from.Year) * 12) + (@to.Month - @from.Month)) * 100 + @to.Day - @from.Day) / 100);
}
public static int DiffYears(this DateTime @from, DateTime @to)
{
return ((((@to.Year - @from.Year) * 100) + (@to.Month - @from.Month)) * 100 + @to.Day - @from.Day) / 10000;
}
#endregion Public Methods
}
Realizacja !
int Age;
int years;
int Months;
//Replace your own date
var d1 = new DateTime(2000, 10, 22);
var d2 = new DateTime(2003, 10, 20);
//Age
Age = d1.GetAge();
Age = d2.GetAge();
//positive
years = d1.DiffYears(d2);
Months = d1.DiffMonths(d2);
//negative
years = d2.DiffYears(d1);
Months = d2.DiffMonths(d1);
//Or
Months = Ext.DiffMonths(d1, d2);
years = Ext.DiffYears(d1, d2);
Warning: date(): Invalid date.timezone value 'Europe/Kyiv', we selected the timezone 'UTC' for now. in /var/www/agent_stack/data/www/doraprojects.net/template/agent.layouts/content.php on line 54
2015-10-22 18:19:46
Oto o wiele bardziej zwięzłe rozwiązanie wykorzystujące VB.Net DateDiff tylko dla roku, miesiąca, dnia. Możesz również załadować bibliotekę DateDiff w C#.
Date1 musi być
VB.NET
Dim date1 = Now.AddDays(-2000)
Dim date2 = Now
Dim diffYears = DateDiff(DateInterval.Year, date1, date2) - If(date1.DayOfYear > date2.DayOfYear, 1, 0)
Dim diffMonths = DateDiff(DateInterval.Month, date1, date2) - diffYears * 12 - If(date1.Day > date2.Day, 1, 0)
Dim diffDays = If(date2.Day >= date1.Day, date2.Day - date1.Day, date2.Day + (Date.DaysInMonth(date1.Year, date1.Month) - date1.Day))
C #
DateTime date1 = Now.AddDays(-2000);
DateTime date2 = Now;
int diffYears = DateDiff(DateInterval.Year, date1, date2) - date1.DayOfYear > date2.DayOfYear ? 1 : 0;
int diffMonths = DateDiff(DateInterval.Month, date1, date2) - diffYears * 12 - date1.Day > date2.Day ? 1 : 0;
int diffDays = date2.Day >= date1.Day ? date2.Day - date1.Day : date2.Day + (System.DateTime.DaysInMonth(date1.Year, date1.Month) - date1.Day);
Warning: date(): Invalid date.timezone value 'Europe/Kyiv', we selected the timezone 'UTC' for now. in /var/www/agent_stack/data/www/doraprojects.net/template/agent.layouts/content.php on line 54
2016-04-29 14:48:16
Oto mój wkład, aby uzyskać różnicę w miesiącach, które uznałem za dokładne:
namespace System
{
public static class DateTimeExtensions
{
public static Int32 DiffMonths( this DateTime start, DateTime end )
{
Int32 months = 0;
DateTime tmp = start;
while ( tmp < end )
{
months++;
tmp = tmp.AddMonths( 1 );
}
return months;
}
}
}
Użycie:
Int32 months = DateTime.Now.DiffMonths( DateTime.Now.AddYears( 5 ) );
Możesz utworzyć inną metodę o nazwie DiffYears i zastosować dokładnie taką samą logikę jak powyżej i AddYears zamiast AddMonths w pętli while.
Warning: date(): Invalid date.timezone value 'Europe/Kyiv', we selected the timezone 'UTC' for now. in /var/www/agent_stack/data/www/doraprojects.net/template/agent.layouts/content.php on line 54
2016-08-29 09:37:25
To odpowiedź na odpowiedź Kirka Wolla. Nie mam wystarczająco dużo punktów reputacji, aby odpowiedzieć na komentarz...
Podobało mi się rozwiązanie Kirka i zamierzałem bezwstydnie go zedrzeć i użyć w moim kodzie, ale kiedy przejrzałem go, zdałem sobie sprawę, że jest zbyt skomplikowany. Niepotrzebne przełączanie i zapętlanie oraz publiczny konstruktor, którego nie ma sensu używać.
Oto moja przeróbka:
public class DateTimeSpan {
private DateTime _date1;
private DateTime _date2;
private int _years;
private int _months;
private int _days;
private int _hours;
private int _minutes;
private int _seconds;
private int _milliseconds;
public int Years { get { return _years; } }
public int Months { get { return _months; } }
public int Days { get { return _days; } }
public int Hours { get { return _hours; } }
public int Minutes { get { return _minutes; } }
public int Seconds { get { return _seconds; } }
public int Milliseconds { get { return _milliseconds; } }
public DateTimeSpan(DateTime date1, DateTime date2) {
_date1 = (date1 > date2) ? date1 : date2;
_date2 = (date2 < date1) ? date2 : date1;
_years = _date1.Year - _date2.Year;
_months = (_years * 12) + _date1.Month - _date2.Month;
TimeSpan t = (_date2 - _date1);
_days = t.Days;
_hours = t.Hours;
_minutes = t.Minutes;
_seconds = t.Seconds;
_milliseconds = t.Milliseconds;
}
public static DateTimeSpan CompareDates(DateTime date1, DateTime date2) {
return new DateTimeSpan(date1, date2);
}
}
Usage1, prawie to samo:
void Main()
{
DateTime compareTo = DateTime.Parse("8/13/2010 8:33:21 AM");
DateTime now = DateTime.Parse("2/9/2012 10:10:11 AM");
var dateSpan = new DateTimeSpan(compareTo, now);
Console.WriteLine("Years: " + dateSpan.Years);
Console.WriteLine("Months: " + dateSpan.Months);
Console.WriteLine("Days: " + dateSpan.Days);
Console.WriteLine("Hours: " + dateSpan.Hours);
Console.WriteLine("Minutes: " + dateSpan.Minutes);
Console.WriteLine("Seconds: " + dateSpan.Seconds);
Console.WriteLine("Milliseconds: " + dateSpan.Milliseconds);
}
Usage2, podobne:
void Main()
{
DateTime compareTo = DateTime.Parse("8/13/2010 8:33:21 AM");
DateTime now = DateTime.Parse("2/9/2012 10:10:11 AM");
Console.WriteLine("Years: " + DateTimeSpan.CompareDates(compareTo, now).Years);
Console.WriteLine("Months: " + DateTimeSpan.CompareDates(compareTo, now).Months);
Console.WriteLine("Days: " + DateTimeSpan.CompareDates(compareTo, now).Days);
Console.WriteLine("Hours: " + DateTimeSpan.CompareDates(compareTo, now).Hours);
Console.WriteLine("Minutes: " + DateTimeSpan.CompareDates(compareTo, now).Minutes);
Console.WriteLine("Seconds: " + DateTimeSpan.CompareDates(compareTo, now).Seconds);
Console.WriteLine("Milliseconds: " + DateTimeSpan.CompareDates(compareTo, now).Milliseconds);
}
Warning: date(): Invalid date.timezone value 'Europe/Kyiv', we selected the timezone 'UTC' for now. in /var/www/agent_stack/data/www/doraprojects.net/template/agent.layouts/content.php on line 54
2017-04-21 15:33:26
W moim przypadku wymagane jest obliczenie pełnego miesiąca od daty rozpoczęcia do dnia poprzedzającego ten dzień w następnym miesiącu lub od początku do końca miesiąca.
Ex: od 1/1/2018 do 31/1/2018 to pełny miesiąc
Ex2: od 5/1/2018 do 4/2/2018 to pełny miesiąc
Więc na podstawie tego oto moje rozwiązanie:
public static DateTime GetMonthEnd(DateTime StartDate, int MonthsCount = 1)
{
return StartDate.AddMonths(MonthsCount).AddDays(-1);
}
public static Tuple<int, int> CalcPeriod(DateTime StartDate, DateTime EndDate)
{
int MonthsCount = 0;
Tuple<int, int> Period;
while (true)
{
if (GetMonthEnd(StartDate) > EndDate)
break;
else
{
MonthsCount += 1;
StartDate = StartDate.AddMonths(1);
}
}
int RemainingDays = (EndDate - StartDate).Days + 1;
Period = new Tuple<int, int>(MonthsCount, RemainingDays);
return Period;
}
Użycie:
Tuple<int, int> Period = CalcPeriod(FromDate, ToDate);
Uwaga: w moim przypadku wymagane było obliczenie pozostałych dni po pełnych miesiącach, więc jeśli nie jest to Twój przypadek, możesz można zignorować wynik dni lub nawet można zmienić metodę powrotu z krotki do liczby całkowitej.
Warning: date(): Invalid date.timezone value 'Europe/Kyiv', we selected the timezone 'UTC' for now. in /var/www/agent_stack/data/www/doraprojects.net/template/agent.layouts/content.php on line 54
2018-03-03 02:51:05
public static int PayableMonthsInDuration(DateTime StartDate, DateTime EndDate)
{
int sy = StartDate.Year; int sm = StartDate.Month; int count = 0;
do
{
count++;if ((sy == EndDate.Year) && (sm >= EndDate.Month)) { break; }
sm++;if (sm == 13) { sm = 1; sy++; }
} while ((EndDate.Year >= sy) || (EndDate.Month >= sm));
return (count);
}
To rozwiązanie służy do obliczania najmu/abonamentu, gdzie różnica nie oznacza odejmowania, ale ma być rozpiętością w tych dwóch datach.
Warning: date(): Invalid date.timezone value 'Europe/Kyiv', we selected the timezone 'UTC' for now. in /var/www/agent_stack/data/www/doraprojects.net/template/agent.layouts/content.php on line 54
2018-03-03 04:10:16
Są 3 przypadki: ten sam rok, poprzedni rok i inne lata.
Jeśli dzień miesiąca nie ma znaczenia...
public int GetTotalNumberOfMonths(DateTime start, DateTime end)
{
// work with dates in the right order
if (start > end)
{
var swapper = start;
start = end;
end = swapper;
}
switch (end.Year - start.Year)
{
case 0: // Same year
return end.Month - start.Month;
case 1: // last year
return (12 - start.Month) + end.Month;
default:
return 12 * (3 - (end.Year - start.Year)) + (12 - start.Month) + end.Month;
}
}
Warning: date(): Invalid date.timezone value 'Europe/Kyiv', we selected the timezone 'UTC' for now. in /var/www/agent_stack/data/www/doraprojects.net/template/agent.layouts/content.php on line 54
2018-03-03 04:16:37
Napisałem funkcję, aby to osiągnąć, ponieważ inne sposoby nie działały dla mnie.
public string getEndDate (DateTime startDate,decimal monthCount)
{
int y = startDate.Year;
int m = startDate.Month;
for (decimal i = monthCount; i > 1; i--)
{
m++;
if (m == 12)
{ y++;
m = 1;
}
}
return string.Format("{0}-{1}-{2}", y.ToString(), m.ToString(), startDate.Day.ToString());
}
Warning: date(): Invalid date.timezone value 'Europe/Kyiv', we selected the timezone 'UTC' for now. in /var/www/agent_stack/data/www/doraprojects.net/template/agent.layouts/content.php on line 54
2018-03-03 09:27:19
Moje zrozumienie całkowitej różnicy miesięcy między 2 datami ma część integralną i ułamkową (Data ma znaczenie).
Integralną częścią jest pełna różnica miesięcy.
Ułamkowa część jest dla mnie różnicą % dnia (do pełnych dni miesiąca) między miesiącami początkowymi i końcowymi.
public static class DateTimeExtensions
{
public static double TotalMonthsDifference(this DateTime from, DateTime to)
{
//Compute full months difference between dates
var fullMonthsDiff = (to.Year - from.Year)*12 + to.Month - from.Month;
//Compute difference between the % of day to full days of each month
var fractionMonthsDiff = ((double)(to.Day-1) / (DateTime.DaysInMonth(to.Year, to.Month)-1)) -
((double)(from.Day-1)/ (DateTime.DaysInMonth(from.Year, from.Month)-1));
return fullMonthsDiff + fractionMonthsDiff;
}
}
Z tym rozszerzeniem, są to Wyniki:
2/29/2000 TotalMonthsDifference 2/28/2001 => 12
2/28/2000 TotalMonthsDifference 2/28/2001 => 12.035714285714286
01/01/2000 TotalMonthsDifference 01/16/2000 => 0.5
01/31/2000 TotalMonthsDifference 01/01/2000 => -1.0
01/31/2000 TotalMonthsDifference 02/29/2000 => 1.0
01/31/2000 TotalMonthsDifference 02/28/2000 => 0.9642857142857143
01/31/2001 TotalMonthsDifference 02/28/2001 => 1.0
Warning: date(): Invalid date.timezone value 'Europe/Kyiv', we selected the timezone 'UTC' for now. in /var/www/agent_stack/data/www/doraprojects.net/template/agent.layouts/content.php on line 54
2018-03-03 17:19:08
Nie ma zbyt wielu jasnych odpowiedzi na ten temat, ponieważ zawsze zakładasz rzeczy.
To rozwiązanie oblicza między dwoma datami miesiące między założeniem, że chcesz zapisać dzień miesiąca dla porównania, (co oznacza, że dzień miesiąca jest brany pod uwagę w obliczeniach)
Przykład, jeśli masz datę 30 sty 2012, 29 Lut 2012 nie będzie miesiąc, ale 01 marzec 2013 będzie.
Został przetestowany dość dokładnie, prawdopodobnie wyczyści go później, jak go używamy, ale tutaj:
private static int TotalMonthDifference(DateTime dtThis, DateTime dtOther)
{
int intReturn = 0;
bool sameMonth = false;
if (dtOther.Date < dtThis.Date) //used for an error catch in program, returns -1
intReturn--;
int dayOfMonth = dtThis.Day; //captures the month of day for when it adds a month and doesn't have that many days
int daysinMonth = 0; //used to caputre how many days are in the month
while (dtOther.Date > dtThis.Date) //while Other date is still under the other
{
dtThis = dtThis.AddMonths(1); //as we loop, we just keep adding a month for testing
daysinMonth = DateTime.DaysInMonth(dtThis.Year, dtThis.Month); //grabs the days in the current tested month
if (dtThis.Day != dayOfMonth) //Example 30 Jan 2013 will go to 28 Feb when a month is added, so when it goes to march it will be 28th and not 30th
{
if (daysinMonth < dayOfMonth) // uses day in month max if can't set back to day of month
dtThis.AddDays(daysinMonth - dtThis.Day);
else
dtThis.AddDays(dayOfMonth - dtThis.Day);
}
if (((dtOther.Year == dtThis.Year) && (dtOther.Month == dtThis.Month))) //If the loop puts it in the same month and year
{
if (dtOther.Day >= dayOfMonth) //check to see if it is the same day or later to add one to month
intReturn++;
sameMonth = true; //sets this to cancel out of the normal counting of month
}
if ((!sameMonth)&&(dtOther.Date > dtThis.Date))//so as long as it didn't reach the same month (or if i started in the same month, one month ahead, add a month)
intReturn++;
}
return intReturn; //return month
}
Warning: date(): Invalid date.timezone value 'Europe/Kyiv', we selected the timezone 'UTC' for now. in /var/www/agent_stack/data/www/doraprojects.net/template/agent.layouts/content.php on line 54
2018-03-03 18:47:23
Aby móc obliczyć różnicę między 2 datami w miesiącach jest całkowicie logiczną rzeczą do zrobienia i jest potrzebna w wielu aplikacjach biznesowych. Kilku programistów tutaj, którzy dostarczyli komentarze takie jak-Jaka jest różnica w miesiącach między "1 maja 2010" i " 16 czerwca 2010, jaka jest różnica w miesiącach między 31 grudnia 2010 a 1 stycznia 2011? -- nie rozumieją podstaw aplikacji biznesowych.
Oto odpowiedź na powyższe 2 komentarze-liczba miesięcy od 1-maja-2010 do 16-czerwca-2010 wynosi 1 miesiąc, liczba miesięcy od 31-grudnia-2010 do 1-stycznia-2011 wynosi 0. Byłoby bardzo głupie obliczyć je jako 1,5 miesiąca i 1 sekundy, jak sugerowali Programiści powyżej.
Osoby, które pracowały nad kartami kredytowymi, obsługą hipoteczną, obsługą podatkową, obsługą najmu, miesięcznymi obliczeniami odsetek i wieloma innymi rozwiązaniami biznesowymi, zgodziłyby się.
Problem polega na tym, że taka funkcja nie jest zawarta w C# lub VB.NET jeśli o to chodzi. Datediff bierze pod uwagę tylko lata lub miesiąc komponentu, więc jest rzeczywiście bezużyteczny.
Oto kilka rzeczywistych przykładów, gdzie trzeba i prawidłowo można obliczyć miesiące:
Mieszkałeś w wynajmie krótkoterminowym od 18-lutego do 23-sierpnia. Ile miesięcy tam byłeś? Odpowiedź jest prosta-6 miesięcy
Masz konto bankowe, w którym odsetki są obliczane i wypłacane na koniec każdego miesiąca. Wpłacasz pieniądze na 10-cze i wyjmujesz je 29-paź (w tym samym roku). Na ile miesięcy dostajesz odsetki? Bardzo prosta odpowiedź - 4 miesiące (znowu dodatkowe dni nie mają znaczenia)
W aplikacjach biznesowych, w większości przypadków, kiedy trzeba obliczyć miesiące, to dlatego, że trzeba znać "pełne" miesiące na podstawie tego, jak ludzie obliczają czas, a nie na podstawie abstrakcyjnych / nieistotnych myśli.
Warning: date(): Invalid date.timezone value 'Europe/Kyiv', we selected the timezone 'UTC' for now. in /var/www/agent_stack/data/www/doraprojects.net/template/agent.layouts/content.php on line 54
2012-06-11 17:27:24
Rozszerzona struktura Kirks z ToString (format) i Duration(long ms)
public struct DateTimeSpan
{
private readonly int years;
private readonly int months;
private readonly int days;
private readonly int hours;
private readonly int minutes;
private readonly int seconds;
private readonly int milliseconds;
public DateTimeSpan(int years, int months, int days, int hours, int minutes, int seconds, int milliseconds)
{
this.years = years;
this.months = months;
this.days = days;
this.hours = hours;
this.minutes = minutes;
this.seconds = seconds;
this.milliseconds = milliseconds;
}
public int Years { get { return years; } }
public int Months { get { return months; } }
public int Days { get { return days; } }
public int Hours { get { return hours; } }
public int Minutes { get { return minutes; } }
public int Seconds { get { return seconds; } }
public int Milliseconds { get { return milliseconds; } }
enum Phase { Years, Months, Days, Done }
public string ToString(string format)
{
format = format.Replace("YYYY", Years.ToString());
format = format.Replace("MM", Months.ToString());
format = format.Replace("DD", Days.ToString());
format = format.Replace("hh", Hours.ToString());
format = format.Replace("mm", Minutes.ToString());
format = format.Replace("ss", Seconds.ToString());
format = format.Replace("ms", Milliseconds.ToString());
return format;
}
public static DateTimeSpan Duration(long ms)
{
DateTime dt = new DateTime();
return CompareDates(dt, dt.AddMilliseconds(ms));
}
public static DateTimeSpan CompareDates(DateTime date1, DateTime date2)
{
if (date2 < date1)
{
var sub = date1;
date1 = date2;
date2 = sub;
}
DateTime current = date1;
int years = 0;
int months = 0;
int days = 0;
Phase phase = Phase.Years;
DateTimeSpan span = new DateTimeSpan();
while (phase != Phase.Done)
{
switch (phase)
{
case Phase.Years:
if (current.AddYears(years + 1) > date2)
{
phase = Phase.Months;
current = current.AddYears(years);
}
else
{
years++;
}
break;
case Phase.Months:
if (current.AddMonths(months + 1) > date2)
{
phase = Phase.Days;
current = current.AddMonths(months);
}
else
{
months++;
}
break;
case Phase.Days:
if (current.AddDays(days + 1) > date2)
{
current = current.AddDays(days);
var timespan = date2 - current;
span = new DateTimeSpan(years, months, days, timespan.Hours, timespan.Minutes, timespan.Seconds, timespan.Milliseconds);
phase = Phase.Done;
}
else
{
days++;
}
break;
}
}
return span;
}
}
Warning: date(): Invalid date.timezone value 'Europe/Kyiv', we selected the timezone 'UTC' for now. in /var/www/agent_stack/data/www/doraprojects.net/template/agent.layouts/content.php on line 54
2013-12-06 13:37:52
var dt1 = (DateTime.Now.Year * 12) + DateTime.Now.Month;
var dt2 = (DateTime.Now.AddMonths(-13).Year * 12) + DateTime.Now.AddMonths(-13).Month;
Console.WriteLine(dt1);
Console.WriteLine(dt2);
Console.WriteLine((dt1 - dt2));
Warning: date(): Invalid date.timezone value 'Europe/Kyiv', we selected the timezone 'UTC' for now. in /var/www/agent_stack/data/www/doraprojects.net/template/agent.layouts/content.php on line 54
2014-01-23 17:42:55
Oto jak podchodzimy do tego:
public static int MonthDiff(DateTime date1, DateTime date2)
{
if (date1.Month < date2.Month)
{
return (date2.Year - date1.Year) * 12 + date2.Month - date1.Month;
}
else
{
return (date2.Year - date1.Year - 1) * 12 + date2.Month - date1.Month + 12;
}
}
Warning: date(): Invalid date.timezone value 'Europe/Kyiv', we selected the timezone 'UTC' for now. in /var/www/agent_stack/data/www/doraprojects.net/template/agent.layouts/content.php on line 54
2015-01-21 11:57:45
int nMonths = 0;
if (FDate.ToDateTime().Year == TDate.ToDateTime().Year)
nMonths = TDate.ToDateTime().Month - FDate.ToDateTime().Month;
else
nMonths = (12 - FDate.Month) + TDate.Month;
Warning: date(): Invalid date.timezone value 'Europe/Kyiv', we selected the timezone 'UTC' for now. in /var/www/agent_stack/data/www/doraprojects.net/template/agent.layouts/content.php on line 54
2015-06-12 07:51:02